No. | Page | Item | Settings | Default | Description |
|
|
|
|
|
|
16 | GENLOCK | GENLOCK | OFF/ON | ON | Turns genlock on and off. |
|
|
|
|
|
|
|
| RETURN VIDEO | OFF/ON | OFF | Turns return video on and off. |
|
|
|
|
|
|
|
| GL H PHASE | 0 | Genlock H phase setting. | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| 0 |
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| GL SC PHASE | 0 | Genlock subcarrier phase setting | |
|
|
|
|
|
|
|
| GL SC 0/180 SEL | 0/180 | 180 | Genlock subcarrier phase setting |
|
|
|
|
|
|
17 | ND COMP | ND OFFSET | OFF/ON | — | Turns on and off the mode which sets ND |
| ADJUST |
|
| (neutral density) filter color compensation | |
| only) |
|
|
| values. |
|
|
|
|
|
|
|
| CLEAR ND | — | EXEC | Clears ND filter color compensation values. |
|
| OFFSET |
|
|
|
|
|
|
|
|
|
18 | AUTO SHADING | AUTO BLK | EXEC | EXEC | Execute the auto black shooting function. |
|
| SHADING |
|
|
|
|
|
|
|
|
|
|
| RESET BLK SHD | EXEC | EXEC | Clears black shooting compensation values. |
|
|
|
|
|
|
|
| TEST OUT SELECT | ENC/R/G/B | ENC | Selects the signal output to the TEST OUT |
|
|
|
|
| connector. |
|
|
|
|
|
|
|
| MASTER GAIN | 0 dB | Temporarily sets the master gain value. | |
|
| (TMP) | 24/30/36/42/48 dB |
|
|
|
|
|
|
|
|
19 | DISC | DELETE LAST CLIP | EXEC | EXEC | Delete the last clip. |
|
|
|
|
|
|
|
| DELETE ALL CLIPS | EXEC | EXEC | Delete all clips on the disc. |
|
|
|
|
|
|
|
| QUICK FORMAT | EXEC | EXEC | Formats the disc. All the recorded data is |
|
|
|
|
| deleted. |
|
|
|
|
|
|
20 | NETWORK | DHCP | ENABL/DSABL | DSABL | Selects whether to enable automatic |
|
|
|
|
| acquisition of the IP address from a DHCP |
|
|
|
|
| server. |
|
|
|
|
|
|
|
| IP ADDRESS | xxx.xxx.xxx.xxx | 192.168.1 | Sets the IP address. |
|
|
|
| .10 |
|
|
|
|
|
|
|
|
| SUBNET MASK | xxx.xxx.xxx.xxx | 255.255.2 | Sets the subnet mask. |
|
|
|
| 55.0 |
|
|
|
|
|
|
|
|
| DEF. GATEWAY | xxx.xxx.xxx.xxx | 0.0.0.0 | Sets the default gateway. |
|
|
|
|
|
|
|
| LINK SPEED | AUTO/10 Mbps/ | AUTO | Sets the communications speed. |
|
|
| 100 Mbps |
|
|
|
|
|
|
|
|
|
| DUPLEX | AUTO/FULL/HALF | AUTO | Sets the duplex mode. |
|
|
|
|
|
|
1)The setting of this item is overridden by the setting of BEFORE END 3 when TYPE DETECTION in the BATTERY 2 page is set to OTHER.
2)The setting of this item is overridden by the setting of END 3 when TYPE DETECTION in the BATTERY 2 page is set to OTHER.
3)This is supported from firmware version 1.4.
4)When TYPE DETECTION in the BATTERY 2 page is set to AUTO, any batteries other than Sony
5)Flashes once per second when the battery status is “BEFORE END”, and flashes 4 times per second when the battery status is “END”.
6)This is supported from firmware version 1.5
Appendixes
Menu List 201