2-2 Accessory Attachments

1 Shoulder strap posts

2 Light shoe

3 LIGHT connector

4 Lens mount

5 Lens locking lever

6 Lens mount cap

7 LENS connector

9 Shoulder pad

8 Tripod mount

Lens cable clamp

Controls and Parts of Functions and Locations 2 Chapter

aShoulder strap posts

Attach the supplied shoulder strap to these posts.

For details, see 9-7 “Attaching the Shoulder Strap” on page 166.

bLight shoe

Attach an optional accessory such as a video light to this shoe.

cLIGHT connector (2-pin, female)

Connect the cable of an Anton Bauer Ultralight System attached to the light shoe. The system operates with lights powered by 12 V, with a maximum power consumption of 50 W.

dLens mount (special bayonet mount) Use this for mounting the lens.

eLens locking lever

After inserting the lens in the lens mount, rotate the lens mount ring with this lever to lock the lens in position.

fLens mount cap

Remove this cap by pushing up the lens locking lever. When no lens is mounted, keep this cap fitted for protection from dust.

gLENS connector (12-pin)

Fit the lens cable to this connector. Contact your Sony representative for more information about the lens you can use.

hTripod mount

When using the camcorder on a tripod, attach the tripod adaptor (option).

iShoulder pad

You can move the shoulder pad forwards or backwards by raising up the shoulder pad locking lever. Do this to ensure the best balance when shooting with the camcorder on your shoulder.

For details, see 9-8 “Adjusting the Shoulder Pad Position” on page 166.

2-2 Accessory Attachments

15