TITLE00037 are assigned to clips C0001.MXF to C0017.MXF on disc 2.

Titles are made up of prefixes, up to 10 characters in length, and five-digit serial numbers such as TITLE 00001.

C0020.MXF

C0002.MXF

C0001.MXF

TITLE00020

TITLE00020

TITLE00001

Clips recorded on Disc 1

C0017.MXF

C0002.MXF

C0001.MXF

TITLE00037

TITLE00022

TITLE00021

Clips recorded on Disc 2

Setting the title prefix

You can assign title prefixes by choosing from a prefix list stored in internal memory, or by entering the prefix directly.

However, to choose from a prefix list, you must create the list beforehand on a computer and transfer it to the unit’s internal memory with a “Memory Stick”.

Setting the initial value of the serial number

The initial value of the serial number can be set to 00001 (the default) or to any other number. The number is automatically incremented by 1 each time you record a clip. When it reaches 99999, it returns to 00001 for the next clip.

Note

Duplicate clip titles can be generated depending on the serial number setting, for example if you reset the serial number to the original value after recording several clips. Care should be taken when setting the serial number.

To assign user-defined titles automatically when clips are recorded

Proceed as follows.

1 Holding down the MENU knob, move the MENU ON/ OFF switch to ON.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to “OPERATION”, and then press the MENU knob.

If this is the first time the OPERATION menu has been displayed, the CONTENTS page of the OPERATION menu appears.

If the menu has been used before, the last accessed page appears.

3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “CLIP TITLE ”, and then press the MENU knob.

If a different page is displayed, turn the MENU knob until the CLIP TITLE page appears, and then press the MENU knob.

The CLIP TITLE page appears.

23 CLIP TITLE

TOP

TITLE

: DSABL

4 Select “TITLE”, and then press the MENU knob.

The z mark beside DSABL changes to a ? mark.

5 Turn the MENU knob to display “ENABL”, and then press the MENU knob.

The following items appear.

23 CLIP TITLE

 

TOP

TITLE

 

:

ENABL

SELECT

PREFIX

:

EXEC

CLEAR

NUMERIC

:

EXEC

LOAD PREFIX DATA:

EXEC

PREFIX

: TITLE

 

 

NUMERIC : 00001

 

 

Clip titles will be generated automatically if you record in this state.

Playback and Recording 3 Chapter

3-2 Recording 53