Setting Up the | Chapter 9 |
Camcorder |
9-1 Power Supply
The following power supplies can be used with the camcorder.
•
•AC power using the
9-1-1 Using a Battery Pack
When a
For details, refer to the battery charger operation manual.
Note on using the battery pack
A warm battery pack may not be able to be fully recharged.
Attaching the battery pack
1 Press the battery pack against the back of the camcorder, aligning the line on the side of the battery pack with the matching line on the camcorder.
Back of camcorder
GL95/L60S/
L80S
Align these lines.
2 Slide the battery pack down until its “LOCK” arrow points at the matching line on the camcorder.
“LOCK” arrow
Matching line on the camcorder
Detaching the battery pack
ACCESS indicator
Holding the button in, pull the battery pack up.
Detaching the battery pack
Note
During recording or playback (while the ACCESS indicator is lit), be careful never to remove the battery pack.
154