The DVR can be set up to contact a computer running Speco Central (Remote Administration System) when an event occurs. Highlight the box under the No. heading and press the 
button to toggle between On and Off. You will only be able to change the IP addresses if No. is enabled.
Highlight the IP Address box that you want to change and press the 
button. Use the arrow buttons to enter the IP address of the computer you want contacted during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting the computer. You can select from 1 to 10 retries.
Figure 50 — Notification Callback setup screen.
Highlight the Mail tab, and the Mail screen displays.
The DVR can be set up to send an email when an event occurs. The Mail account can be turned On or Off by highlighting the boxes under the No. heading and pressing the 
button.
Highlight the + and press the 
button to add a mail recipient.
Figure 51 — Notification Mail setup screen.
Highlight the first box under Recipient and press the 
button. A virtual keyboard appears that you can use to enter the recipient’s
Highlight the second box under Recipient and press the 
button. You can select between Manual and listed SMTP mail server providers.
NOTE: The
Highlight the box under the 
heading and press the 
button to toggle between On and Off. The DVR will clip an event detected video segment and attach it to an email when the 
box is turned On.
NOTE: Attaching a video clip to an email will not be available for the
The Mail accounts can be deleted by highlighting the 
beside the account and pressing the 
button. Highlight SMTP Setup… and press the 
button. The SMTP Setup screen appears.
Highlight the box beside Type and press the 
button. You can select between Manual and listed SMTP mail server providers.
Highlight the box beside SMTP Server and press the 
button. A virtual keyboard appears that you can use to enter the IP address or domain name of the SMTP server.
NOTE: You will need to get the IP Address or domain name of the SMTP Server from your network administrator.
NOTE: You can use the domain name instead of IP address if you already set up the DNS Server when setting up the LAN.
39
