NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the Speco Central (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the 
preset position for each PTZ camera, where you want PTZ cameras the selected camera’s input.
button. A list of PTZ presets appears. Select the to move to when the DVR detects video blind on
Text-In
Highlight 
button. The
The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and POS (Point of Sale; i.e., cash registers). This screen allows you to configure the DVR for each
Highlight the box under the Setup heading, and press the 
button. Selecting the Setup heading changes all the parameters excluding Port settings of all the text input channels.
NOTE: The system performance might be affected when a large quantity of text inputs are detected from several channels at the same time.
Figure 37 — Text-In Settings screen.
Figure 38 — Text-In Device screen.
Highlight the box beside Port, and press the 
button. Select from None, RS232, RS485,
NOTE: If you have set the Port as None, you will not be able to make any changes to the screen.
NOTE: When using the USB to serial
NOTE:
Highlight Setup…, and press the 
button. Use the ATM or POS manufacturer’s recommended settings when configuring the RS232, RS485,
Highlight the box beside 
button. Select your device from the list.
NOTE: The following description is for a Generic Text Device. The screen changes for different types of text input devices, and there will be different parameter boxes for you to enter information.
Highlight the box beside Transaction Start, and press the 
button. Use the virtual keyboard to enter the Transaction Start string. Refer to the device manufacturer’s documentation for the text string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the text input device, you will want to turn On Any Character. Highlight Any Character, and press the 
button to toggle between On and Off.
NOTE: If Any Character is turned On, you will not be able to enter any text in the Transaction Start box.
Highlight the box beside Transaction End, and press the 
button. Use the virtual keyboard to enter the Transaction End string. Refer to the device manufacturer’s documentation for the text string that the device sends when a transaction ends.
31
