⑦Click the 
to adjust the brightness, contrast, saturation and hue of monitoring image.
⑧ Click the 
to control pan, tilt and zoom of the camera from a remote site. ⑨ Click the 
to control alarm out devices at the remote site.
⑩Click the 
to set up the image drawing mode and OSD display. You can adjust the display speed by changing the image drawing mode, and select OSD information to be displayed on the screen.
⑪Click the 
to save the current image as a bitmap or JPEG file format.
⑫The event status window at the bottom displays a list of events that were detected from the remote site.
⑬ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.
Change Camera Title: Changes the camera name.
Enable Audio: Enables audio communication with the remote site. When the audio control panel displays, click the 
to send audio to the connected remote site and click the button again to stop sending audio. Click the 
to monitor live audio from the connected remote site through the attached speaker and click the button again stop monitoring live audio. Clicking both 
and 
allows 
disables audio communication.
Aspect Ratio: Changes the image aspect ratio.
Deinterlacing: Using a deinterlace filter for interlaced video enhances image display quality by eliminating horizontal scan lines and noise in areas with motion.
NOTE: A camera name change in the Remote Watch mode does not affect the camera name set up on the remote site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.
The 
icon will display on each camera screen when audio communication is available between the Speco Remote system and a DVR.
Web Search Mode
Remote Search is a remote web search program that allows you to search recorded video on the remote DVR.
NOTE: The remote site connection in the Remote Search mode will automatically be disconnected if there is no activity for 30 minutes.
69
