INSTALLATION INSTRUCTIONS

Assemble your machine before use. Machines shipped outside the United States need to be uncrated before they can be assembled; refer to the “Uncrating Instructions” included with your machine for the details.

1.Remove all shipping material from your machine once it is in place.

2.Make sure the machine is level before you use it for the first time. The four rubber end caps (see Figure 3) are designed to compensate for uneven floors. Each face of the caps is a different thickness. Twist the caps to stabilize the machine.

Figure 3: Level Adjusting End Caps

3.Open the box you removed from the pedals. The box contains either an external power supply (4600/4400/4200 PT only) or a wall-pack battery charger (4600/4400 CL only). The battery charger is only used to recharge a low battery.

Page 6

Page 15
Image 15
Stairmaster 4600 PT/CL, 4200 PT, 4400 PT/CL manual Installation Instructions, Level Adjusting End Caps