Stairmaster 4200 PT, 4600 PT/CL, 4400 PT/CL DC Power Connector, Installation Instructions, Page

INSTALLATION INSTRUCTIONS

4.If you have a 4600/4400 CL, skip to step 9. If you have a 4600/4400/ 4200 PT, connect the DC cable of the power supply to the connector near the bottom of the left side cover (see Figure 4).

Figure 4: DC Power Connector

5.Place the power supply on the floor near an AC wall outlet. To reduce the hazard of electrical shock, place the power supply in a location away from the machine and away from exposure to perspiration. You should not place your power supply on a carpet because it may over heat.

Page 7