Stairmaster 4600 PT/CL 4600/4400 PT/CL CONSOLE DIAGNOSTIC TESTS, Diagnostic Codes, Display Test

4600/4400 PT/CL CONSOLE DIAGNOSTIC TESTS

The following tests are performed while the console is in the “SELECT WORKOUT” mode. If the console fails any test, the console should be replaced or exchanged. To return to the “SELECT WORKOUT” mode, press either [CLEAR] or [START/STOP] while in the DIAGNOSTIC mode. Please note that there may be additional verbiage on the display other than is listed in this manual. The FreeClimber console is used on other StairMaster® equipment.

DIAGNOSTIC CODES

[ ^ ] [ 6 ] [ 0 ]	Test display
[ ^ ] [ 6 ] [ 1 ]	Test keyboard
[ ^ ] [ 6 ] [ 2 ]	Test serial port
[ ^ ] [ 6 ] [ 3 ]	Test alternator
[ ^ ] [ 6 ] [ 4 ]	-N/A-
[ ^ ] [ 6 ] [ 5 ]	-N/A-
[ ^ ] [ 6 ] [ 6 ]	Test Tach
[ ^ ] [ 6 ] [ 7 ]	- [ 6 ] [ 9 ] -N/A-

Display Test

During the display test, the console screen alternates between all LCD segments turned on and the sample program profile screen at a 2-second rate.

1.Press [ LEVEL: ^ ], [ 6 ], [ 0 ], [ENTER]. The console will display “DISPLAY TEST”.

2.All LCD segments will turn on for 2 seconds, and then a sample program profile will be displayed for 2 seconds. Press [CLEAR] to end the test.

Keypad Test

Perform this test if you are having trouble entering data into the console. During the test, pressing any key displays that key name on the message line. Press [CLEAR] to exit.

Page 48