FREECLIMBER 4600/4400 PT/CL CONSOLE
intervals at an intensity of 68 steps/min. The CPAT Stair Climb Test has a total of 10 intervals and lasts for 3 minutes, 20 seconds (including warmup).
Turning on the CPAT Stair Climb Test
1.Press [∧ ], [9], [1], [ENTER], on the console keypad. Make sure to press in the middle of each key and be aware that the corre- sponding numbers will not show in the console display.
2.The console will prompt you to “BEGIN FIT TEST.” The test can be stopped at any time by pressing [STOP].
•NYCFD Stair Climb Test – (Fit Test #3) The first phase is a warm- up interval at an intensity of 56 steps/min and lasts 60 seconds, followed by a 60 second rest period (no stepping). At the end of the rest period the time counter will reset to zero. The second phase is at an intensity of 68 steps/min and lasts for 5 minutes, 12 seconds.
Turning on the NYCFD Stair Climb Test
1.Press [∧ ], [9], [2], [ENTER], on the console keypad. Make sure to press in the middle of each key and be aware that the corre- sponding numbers will not show in the console display.
2.The console will prompt you to “BEGIN FIT TEST.” The test can be stopped at any time by pressing [STOP].
Page 30
