Stairmaster 4600 PT/CL, 4200 PT, 4400 PT/CL manual Machine Status Codes

FREECLIMBER 4600/4400 PT/CL CONSOLE

[SELECT]	“CONTRAST ADJ”	5
[SELECT]	“MAX SPEED” - N/A-	6
[SELECT]	“CLINICAL MODE”-N/A-	7
[SELECT]	“SET DEFAULTS “	9

Machine Status Codes

[ ^ ] [ 4		] [ 0 ]		display machine run time in hours
[ ^ ] [ 4		] [ 1 ]		display number of workouts
[	^ ] [ 4	] [ 2 ]		display distance traveled
[	^ ] [ 4	] [ 3	]	display software rev
[	^ ] [ 4	] [ 4	]	display machine type
[	^ ] [ 4	] [ 5	]	-N/A-
[ ^ ] [ 4		] [ 6	]	display machine run time in hours since last cleared
				(used for maintenance)

1.Display the machine run time by pressing [LEVEL: ^], [4], [0]. The console will display “RUN HOURS XXXXX”.

2.Display the number of workouts by pressing [LEVEL: ^], [4], [1]. The console will display “WORKOUTS XXXX.”

3.Display the total distance covered up to date by pressing [LEVEL: ^], [4], [2]. The console will then display “DISTANCE XXXX.”

4.Display the console software revision number by pressing [LEVEL: ^], [4],

[3].The console will display “CONS 92111-XXX.”

5.Display the machine type by pressing [LEVEL: ^], [4], [4]. The console will display “STEPPER (or other machine type).”

6.Display the machine run time since last cleared by pressing [LEVEL: ^], [4],

[6].The console will display “MAINT HOURS XXXX.”

Page 33