MAINTENANCE INSTRUCTIONS
HELPFUL HINTS
Read all maintenance instructions thoroughly before beginning work. In some cases, an assistant is required to perform the necessary tasks. All references to the right or left side and to the front or back are made as if you were on the machine ready to exercise. Major component names and locations are shown in Figure 11.
TOOL LIST
The following tools are needed to perform service and maintenance:
• Torx screwdriver | • phillips screwdriver |
•combination wrenches (sizes 7/16 - 3/4")• wonder bar (included w/ unit)
• combination pliers | • locking pliers |
• | • wire stripper/crimper tool |
• allen wrench set (sizes 5/64 - 1/4") | • external snap ring pliers |
• shop goggles or other eye protection | • torque wrench |
•socket set or nut driver set (sizes 1/4 - 3/4" in 1/16" increments)
MAINTENANCE RECORDS
For ease of maintenance the 4400/4600 PT/CL console will keep track of hours, number of workouts, time between last servicing, etc. You can quickly access any of the custom menus by pressing [LEVEL: ^], [4], [ENTER]. The console will then display “MACHINE STATUS.” Scroll through the following options:
[ SELECT ] | “ RUN HOURS | XXXX”* | 0 | |
[ SELECT ] | “ WORKOUTS | XXXX” | 1 | |
[ SELECT ] | “ DISTANCE |
| XXXX” | 2 |
[ SELECT ] | “ CONS | 90211- XXX ” | 3 | |
[ SELECT ] | “ STEPPER” |
|
| 4 |
[ SELECT ] |
|
|
| |
[ SELECT ] | “ MAINT HOURS | xxxx” | 6 | |
*The machine may show a few hours of use due to testing at the manufacturing facility.
Page 39
