Figure 10: 24/128 8-Connector ArmorBlock Connections

Note 1: The block shown is addressed 01 for the first (4) four hoppers. The block addressed 02 would have the connections for 5-8, etc.

Note 2: If a hopper does not have an optional input or optional output, the T-connector is not required. Connect the patchcord directly to the connector on the ArmorBlock.

24-Pump, 128-Station Controller

Chapter 3: Installation

26

Page 27
Image 27
Sterling 882.00255.00 CV3-655 specifications 24/128 8-Connector ArmorBlock Connections