Sterling 882.00255.00 CV3-655 specifications Pump, 128-Station Controller Configurable Settings

Name	Description	Options	Default
# pulses	Number of pulses of compressed air sent	1–99	5
	through the pump’s filter during cleaning.
	If blowback is not working as desired, the
	service department may ask you to change this
	setting.
On time	Number of seconds that the air compressor	0.1–99.9 sec.	1.0 sec.
	remains on for each pulse during filter cleaning.
	If blowback is not working as desired, the
	service department may ask you to change this
	setting.
Off time	Number of seconds between air pulses during	0.5–99.9 sec.	1.0 sec.
	filter cleaning.
	If blowback is not working as desired, the
	service department may ask you to change this
	setting.
Implosion with Seal	When this option is enabled, the controller
Valve	builds a vacuum in the filter chamber by
	isolating it from the rest of the system with the
	sealing valve. The vacuum is then released to
	dislodge dust and debris.
Implosion without	When this option is enabled, the controller
Seal Valve	builds a vacuum in the filter chamber by
	isolating it from the rest of the system by closing
	all the station sequence valves assigned to that
	pump. The vacuum is then released to dislodge
	dust and debris.
Every n Loads	Number of conveying cycles to stations between	1–99	5
	filter cleanings.
	Adjust this setting based on experience. The
	more dust and debris in your material line, the
	smaller this number needs to be.
# Pulse(s)	Number of pulses of compressed air sent	1–99	5
	through the pump’s filter during cleaning.
	If blowback is not working as desired, the
	service department may ask you to change this
	setting.
Vacuum Time	Number of seconds allowed for the vacuum to
	build up in the filter chamber
Release Time	Number of seconds allowed for the vacuum in
	the filter chamber to dissipate.

24-Pump, 128-Station Controller Chapter 6: Configurable Settings 70