2.Touch anywhere in the rectangle in the upper right of the screen or the Help button on the lower right side of the screen.

The Help Menu appears.

3.In the section of the Help Menu labeled Screen Symbols/Colors, touch Pump.

The Pump Symbols help screen appears, explaining the status represented by each color.

4.When you are finished reviewing the information, touch Pumps (or Stations).

The Pump Status (or Station Status) screen appears.

The following table explains the status represented by each color at the Pump Status screen.

Color

Label

Description

Silver

Offline

Pump is not enabled. The controller ignores any alarms.

Blue

Ready

Pump is off, waiting for demand from a station.

Light Green

Idle

Pump is on, waiting for demand from a station. If there is no

 

 

demand before the end of the auto shutdown delay, the pump

 

 

will turn off.

Green

Loading

Pump is conveying material to a station.

White

Cleaning

Pump’s air filter is being cleaned by blowing compressed air

 

 

backward through it.

Orange

Alarm

Pump is in alarm.

Red

Critical

Pump is in critical alarm. The controller has disabled the pump

 

 

until the alarm is cleared.

Light Yellow

Waiting

Pump is waiting for material to become available.

Additional information about each pump, including configuration settings and the number of hours the pump has been running, is available at the Pump n Setup screen. For details on configuration settings, see page 42. For details on the hour meter, see page 59.

Logging On and Logging Off

Your controller may be set up to require a password for any operation (other than reviewing station and pump status, silencing alarms, reviewing the alarm log, and looking at help screens). If so, a password entry screen will appear:

Press the Enter Password button. A keypad will appear:

24-Pump, 128-Station Controller

Chapter 4: Operation

54

Page 55
Image 55
Sterling 882.00255.00 CV3-655 specifications Logging On and Logging Off