Figure 17: Proper Central Alarm Connections

3.Attach one connector of a yellow patch cord to the terminal on the alarm silence switch module. Tighten the cord grip ring until snug.

4.Attach the other connector to the upper left terminal of the ArmorBlock. Tighten the cord grip ring until snug.

Note: Retain the terminal caps from the ArmorBlock. They may be used later.

Note the following illustration for 4-connector central alarm ArmorBlocks:

24-Pump, 128-Station Controller

Chapter 3: Installation

35

Page 36
Image 36
Sterling 882.00255.00 CV3-655 specifications Proper Central Alarm Connections