Sterling 882.00255.00 CV3-655 instruction

2.Touch the icon for the pump you want to set up, and hold it for several seconds. The Pump n Setup screen appears:

3.Touching Help in the lower right of this screen gives you a menu of online help for the choices in this screen.

4.Adjust settings as required. Touching any box that appears in red (for “disabled”) toggles it to green (for “enabled”), and vice versa. Touching any box that appears in light gray gives you a keypad to enter a new value.

Keypad entry works as with many ATM machines: the first digit you enter initially appears in the rightmost column and moves to the left as you enter more digits. Use ← to erase any mistakes. Use ↵ to enter the value. The keypad disappears and the Pump n Setup screen shows the new value in the selected gray box.

See page 64 for details on the options and their default settings.

5.As appropriate:

a.Copy this pump’s settings to one or more other pumps, as described below

—or—

b.Touch Back ◄ to go to the Pump n-1 Setup screen

—or—

24-Pump, 128-Station Controller

Chapter 3: Installation

45

Image 46

Sterling 882.00255.00 CV3-655 specifications

Contents

SCC 24-Pump 128-Station Controller Parts and Service Department Shipping Information Table of Contents Maintenance How to Use This Manual SafetySafety Symbols Used in this Manual Wear Safety Glasses and Work Gloves General Responsibility ResponsibilityOperator Responsibility Maintenance Responsibility Reporting a Safety Defect Functional Description Standard FeaturesMechanical Features Models Covered in This Manual Electrical Features Optional FeaturesSafety Devices and Interlocks Controller Features Safety Device Lock-Outs Safety Circuit StandardsFail Safe Operation Uncrating InstallationSystem Installation Overview Mounting the Control Panel Electrical Connections Making Control Panel Power Drop Wiring ConnectionsInstalling KwikLink Cable Running KwikLink Cables Setting Up and Installing Mounting Plates Setting Up Mounting Plates Installing Assembled Mounting Plates Terminating Cable Runs Installing Inside KwikLink Connectors with Blank Caps Discard the standard resistor cap to eliminate confusion Addressing ArmorBlocks Addressing and Installing ArmorBlocksArmorBlock Address Ranges Setting ArmorBlock Addresses Using seal block to pierce cable Installing KwikLink Connectors Connecting the Controller to the Network Connecting the Remote Interface to the Main ControllerPage Connecting the Power Supply Enclosure to the Network Proper Controller and Remote Interface ConnectionsPage Proper Power Supply Enclosure Connections Connecting Vacuum Receivers to the Network 24/128 8-Connector ArmorBlock Connections Proper Vacuum Receiver Connections Connecting Vacuum Pumps and Filter Chambers to the Network Connecting Vacuum Pumps Proper Vacuum Pump Connections, Standard XPD/XPC Pumps Proper Vacuum Pump Connections, Xpdb Pump Connecting Filter Chambers Proper Filter Chamber Connections, Blowback Proper Filter Chamber Connections, Implosion Type Connecting Central Alarms to the Network Proper Central Alarm Connections Setup Connector ArmorBlock Connections for Central Alarms Setting Up the System Setting the Number of Stations and the Number of Pumps Checking Addressing and Wiring for System Components Setting the Date/TimeNaming Purge Valves and Materials Setting Up Alarm Silences Alarm Horn Silence Setting Up Pump Staging Setting Up Stations Setting Up a Single Station Naming Stations Copying Settings from One Station to Others To copy the selected station’s settings to one other station Setting Up Pumps Setting Up a Single PumpPage Copying Settings from One Pump to Others Naming Pumps To copy the selected pump’s settings to one other pump To copy the current pump’s settings to all other pumps Finishing Setup Setting Up Passwords Password Duration Save/Restore Settings Initial Startup Overview OperationStarting and Stopping the System Basic Tasks Reviewing Station Status Reviewing Pump Status Color Label Description Logging On and Logging Off Enter the alphanumeric password Enabling and Disabling Stations and Pumps Reaching and Reading the Station Operator Screens Reviewing and Adjusting Basic Station SettingsNavigating among the Station Operator Screens Adjusting Convey Time and Dump Delay Activating and Stopping Priority Convey for a Station Changing the Mixture for a Remote Proportioning Valve Advanced Tasks Reviewing and Resetting a Pump Hour MeterTransferring Stations to a Standby Pump Page Page Reviewing Alarms AlarmsSilencing Alarms Corrective Maintenance MaintenancePreventative Maintenance Network Scanner Module Considerations Options for Station Setup Configurable SettingsMemory Module Considerations Name Description Options Default Conveying Options Option Input Pump, 128-Station Controller Configurable Settings Pump, 128-Station Controller Configurable Settings Options for Pump Setup Pump, 128-Station Controller Configurable Settings Troubleshooting General Troubleshooting Station Alarms Alarm message Possible cause Pump, 128-Station Controller Troubleshooting Pump Alarms System Alarms Appendix WarrantyOptional Components Drawings and Diagrams 24-Pump, 128-Station Controller with 10 Display Spare Parts List Typical System Installation Layout Returned Material Policy Warranty ReturnsCredit Returns Controller Safety Tags Safety Tag InformationController Identification Serial Number Tag Parts Department Service DepartmentTechnical Assistance Contact Information Sales Department