Setting Up Stations

Before starting the system, you must define several settings for each station, such as which pump conveys material to it and whether the station has a slide gate. This section first discusses how to use the controller’s menu system to configure stations. The table on pp. 64– 68 discusses the individual choices.

Setting Up a Single Station

1.Go to the Station Status screen if needed.

To reach this screen from any other screen, touch Stations on the right-hand side of the screen. The Station Status screen appears. Depending on which model you have, your screen will appear as one of the following:

2.Touch the icon for the station you want to set up, and hold it for several seconds. The Station n Operator Settings screen for the selected station appears:

Touch Station Setup at the Station n Operator Settings screen.

The Station n Setup screen appears:

24-Pump, 128-Station Controller

Chapter 3: Installation

41

Page 42
Image 42
Sterling 882.00255.00 CV3-655 specifications Setting Up Stations, Setting Up a Single Station