Sunbeam BM7800 manual Programming your Quantum SmartBake, Pre-Heat Kneading

Programming your Quantum SmartBake®

The SmartBake technology of your
breadmaker allows you to program 8 of your
own recipes.
By following these few simple instructions	Baking Progess Monitor
your favourite recipes will be at your
fingertips.

Before commencing programming of your favourite recipes, it’s important that you have a good understaning of each of the stages of the breadmaking cycle.

Note: The order in which each of these stages are discussed below are not true to the sequence of the breadmaking cycle, each consecutive stage has been numbered ❶ to

➓.

Pre-Heat

Kneading

Your Quantum SmartBake features a Pre-Heat function which helps to bring the ingredients to the optimum temperature for the yeast to activate when the kneading cycle begins. This is mainly used on Wheat breads and when making Jam, but is also handy to use on cold days.

The adjustable time for Pre-Heat is: 0 - 99 minutes.

The Kneading cycle turns your ingredients to dough and is the most vital stage of breadmaking. It mixes the ingredients, activates the yeast and forms the frame work for the dough to rise

The adjustable time for Knead 1 is: 0 - 10 minutes.

The mixing paddle speed: Slow

The adjustable time for Knead 2 is: 0 - 30 minutes.

The mixing paddle speed: Fast

Although included as part of the kneading cycle, the knock down controls the expansion of gas in the rising cycles (ridding unwanted air pockets).

The adjustable time for Knockdown 1 is: 0 - 30 seconds.

The mixing paddle speed: Fast

The adjustable time for Knockdown 2 is: 0 - 30 seconds.

The mixing paddle speed: Fast

22