Programming your Quantum SmartBake - continued
When programming you can either use one of the existing menus or you can start from scratch
by simply pressing the Book icon ( 
) and following steps 3 to 5 below.
1.Before you start programming your own recipe, select from one of the existing menu’s from (1) to (8). This will be the basis of your new recipe.
Simply press the MENU button to cycle through the menus.
Note: Refer to the Time cycle chart on page 74, so you can choose the most appropriate menu.
2.To commence programming press the MODIFY button for 2 seconds.
The control panel will beep once, the
book icon ( 
) will show on the LCD window and the first stage of the breadmaking cycle - Preheat ( 
) will flash.
3.To adjust times press the +/- (▼/▲) buttons. When you have selected the desired time, press the MODIFY button to move to the next stage of the breadmaking cycle.
Then press the +/- (▼/▲) buttons again to select your desired times. Repeat this until all times have been entered.
Note: The process is completed when a
longer double beep is heard, the book
icon ( 
) will flash and the total breadmaking cycle time is displayed. Note: Don’t forget, you can use the Quick
Reference Help Cards as a reminder.
4.Once you have finished programming, you can either save your recipe now, by simply
pressing the SAVE button, the book icon
( 
) will stop flashing and the control panel will beep 3 times.
Your recipe has now been saved into one of the 8 Favourite Recipe slots.
OR
You can test your recipe first, without yet saving it by simply pressing START. If you then want to save the recipe you must ensure
that you press SAVE before the end of the KEEP WARM ( 
) mode.
Note: You can not save the recipe once the Keep Warm cycle is complete.
5.To cancel the programming process at any stage simple press the CANCEL button.
Reprogramming a Favourite Recipe
You can make changes to, or replace any of your saved Favourite Recipes at any time.
1.Select the recipe you wish to modify by
pressing the book icon ( 
) button. This will allow you to scroll through Favourite Recipes
(1)to (8).
2.To commence programming press the MODIFY button for 2 seconds.
The control panel will beep once and the first stage of the breadmaking cycle - Preheat
(
) will flash.
You can now follow the instructions as given in the programming section, steps 3 - 5.
24
