Sunbeam BM7800 manual Program Setting Times and Display Information, Contact Customer Service on

Program Setting Times and Display Information

The LCD window will tell you if there is a problem with your Quantum SmartBake. Always use your Quantum SmartBake in a room free of drafts. Do not use your

Quantum SmartBake outdoors, near a heat vent or in direct sunlight.

DISPLAY READS	PROBLEM	SOLUTION
“0:00” (:) flashing	Select program setting	Use the Menu button to
		select program.
“E:01” flashing	The baking chamber is too	Open the lid and remove
	hot to begin another cycle	bread pan to cool the chamber.
		After the panel message disappears,
		put the bread pan back into the
		chamber and press START again.
“E:02” flashing	Sensor malfunction
“E:03” flashing	Sensor malfunction
“E:04” flashing	CPU malfunction	Contact Customer Service on
		the toll free number
“E:05” flashing	Heater control malfunction	1800 025 059.
“E:08” flashing	Heater control malfunction

Note: After baking a loaf of bread, it is recommended to cool the breadmaker down to room temperature as temperatures above ambient reduce the rising height of the bread due to the sensitivity of yeast.

You will hear a beep when:

The power is turned ON	Long beep
Select a setting from the Menu	Short beep
Invalid key-in	Long beep
Commencement of baking cycle	2 long beeps
Completion of bread baking process	Short and Long beeps

91