ATZn Restore Configuration Profile

Your modem is supplied with a default operating set up. You can change this temporarily by issuing commands while you are working, or permanently by using the &Wn command to store profiles you’ve made in non-volatile memory (where n=profile 0,1,2 or 3).

The Zn command returns the modem to saved configuration profile n. For example: If you have saved a configuration into profile 2 by using &W2, you can restore the modem to the values contained in saved configuration 2 by:

Type: ATZ2 <E>

To restore factory defaults use the &F command.

The Zn command must be the last command on a line.

Options

ATZ0

Restore active configuration from stored profile 0

ATZ1

Restore active configuration from stored profile 1

ATZ2

Restore active configuration from stored profile 2

ATZ3

Restore active configuration from stored profile 3

See Also

&Wn command

Write Configuration

&F command

Restore Factory Defaults

&F. command

Reinitialise modem

&V command

View Active Configuration

Page 108

Page 108
Image 108
Telenetics 56 manual ATZn Restore Configuration Profile, ATZ0, ATZ1, ATZ2, ATZ3