Telenetics 56 manual ATM Monitor, ATM0, ATM2, ATM3, ATM4

ATM Monitor

Your modem has a built-in speaker enabling you to monitor the progress of calls. You can listen for dial tones, busy signals, a successful connection to another modem, or someone answering your call.

The M command controls the operation of the speaker.

☞Some modems also provide volume control via the L command.

Options

ATM0	Speaker is always off
ATM1 ■	Speaker is on whenever the modem is dialling or answering a call. When a
	connection is established, the speaker is switched off
ATM2	Speaker is always on
ATM3	Speaker is off whenever the modem is dialling or once a connection is
	established
ATM4	Speaker is on whenever the modem is dialling or answering. The speaker will
	also be on during retrains or rate changes.
Range
0-4
See Also
L Command	Speaker Volume Control

Page 96