AT\Bn Generate Break
The \Bn command is used to send a break sequence to the remote modem of length n*100mS. The length of the break sequence may be set from 0.1 seconds to 0.9 seconds.
The default length of breaks generated by the modem is 0.3 seconds.
The \K command determines how the modem will react when a break sequence is received. This command stores the break length into S43 in units of 20mS.
Options
AT\B4 | Generate a break sequence 0.4 seconds long |
Default |
|
3 |
|
See Also |
|
\K command | Break Control |
S Register 43 | Break Sequence Length |
Range |
|
|
Page 168
