Tab
The [Parameter Setting] screen has [General], [General (2)], [Device], [LAN], [WLAN], [WLAN (2)] and [RFID] tabs.
When any of these tabs is clicked, the selected tab page is displayed to allow setting the related parameters. The parameter setting values are obtained from the printer at one time for the all controls in the all tab pages.
However, only active controls are reflected in the printer when the printer settings are updated.
[Set Parameter...]
The parameter setting values displayed on the screen are downloaded to the printer to update the printer settings.
If an improper value is included in the downloaded data, the error message is displayed. When there is no group to be downloaded, this button is grayed out.
When this button is clicked, the following message is displayed.
When [Yes] is clicked, the parameter settings are downloaded to the printer. When [No] is clicked, the processing is canceled.
A communication with the printer may be disabled when any parameter on the [WLAN] / [WLAN (2)] tab page is changed.
If a communication is disabled after changing the WLAN parameters, check the network environment.
When Multi LAN is selected for the interface, the [Printer List] screen is displayed to allow choosing the printers to be updated.
When the processing starts, the progress status screen is displayed. When the processing is completed, the completion screen is displayed.
This function is executed only when the printer is in online mode and idle state.
After downloading the setting values for the all active controls to the printer, obtain the setting values from the printer to check if the update succeeded or not.
[Get Parameter]
Currently set parameter setting values are obtained from the printer, and displayed. When this button is clicked, the processing starts.
When the processing starts, the progress status screen is displayed. When the processing is completed, the completion screen is displayed.
This function is executed only when the printer is in online mode and idle state.
The obtained values are reflected in each control on the [Parameter Setting] screen.
The currently set values are obtained from the printer for the all controls in the all tab pages except for a part of the objects (File information of supplicant).
When Multi LAN is selected for the interface, this function is disabled.
[Restore to Online]
The printer mode is changed from the parameter setting to online.
Once the parameter settings are downloaded to or obtained from the printer, this button becomes visible. When this button is active, you need to click it after the processing is completed.
After the printer mode normally shifts to online, the button is hidden.
When Multi LAN is selected for the interface, the printer will automatically return to online mode.
The printer mode needs to be restored to online each time the parameter settings are obtained.
33
