When no monochrome bitmap file with proper name is found in the specified folder, the error message is displayed.
Bitmap file name format
G_"Type""Code" (_"Left Offset"_"Top Offset"_"Character Spacing").bmp <Example> When Type = 01, Code = 20: G_0120.bmp or G_0120_0_0_0.bmp
When Type = 51, Code = FFFF: G_51FFFF.bmp or G_51FFF_0_0_0.bmp
Restriction on the bitmap file
When [Type] = "41", the size shall be 16 x 16 dots. When [Type] = "42", the size shall be 24 x 24 dots. When [Type] = "43", the size shall be 32 x 32 dots. When [Type] = "44", the size shall be 48 x 48 dots. When [Type] = other value than above:
▪When [Location] = "Onboard Flash Memory", the size shall be 720 x 720 dots or less.
▪When [Location] = "USB Memory" and [Printer] =
▪When [Location] = "USB Memory" and [Printer] =
▪When [Location] = "USB Memory" and [Printer] =
▪When [Location] = "USB Memory" and [Printer] =
▪When [Location] = "USB Memory" and [Printer] =
▪When [Location] = "USB Memory" and [Printer] =
[Bitmap List]
Bitmap files in the location specified for the [Bitmap path] are displayed. Displayed files are original files used for creating an external character file.
[Size]
The size and image of the selected bitmap file is displayed.
[Type]
Specify a type number used for storing the file as an external character.
When the "Folder" is selected for the [Specification Method], this becomes invalid.
Default | 01 | |
Range | When [Location] = "Onboard Flash Memory": 01 to 44, 51 | |
When [Location] = "USB Memory": 01 to 44, 51 to 55 | ||
|
[Code]
Set the character code in hex. format for storing the file as an external character.
One hexadecimal code is expressed with two characters. (Example: "0"
Default | 20 |
Range | When [Type] = any of "01" to "40": 20 to FF |
When [Type] = any of "41" to "44": 40 to 7E, 80 to FC | |
| When [Type] = any of "51" to "55": 2020 to FFFF |
[Left Offset]
Set a value for the left offset from the reference coordinate.
When any of "41" to "44" is set for the [Type], this becomes invalid.
When the "Folder" is selected for the [Specification Method], this becomes invalid.
Default | 0 dot |
| |
| When [Location] = "Onboard Flash Memory": 0 to 719 dots |
| |
| When [Location] = "USB Memory" and [Printer] = | ||
| 0 to 831 dots |
| |
Range | When [Location] = "USB Memory" and [Printer] = | 0 to 1247 dots | |
When [Location] = "USB Memory" and [Printer] = | 0 to 1227 dots | ||
| |||
| When [Location] = "USB Memory" and [Printer] = | 0 to 2454 dots | |
| When [Location] = "USB Memory" and [Printer] = | 0 to 1215 dots | |
| When [Location] = "USB Memory" and [Printer] = | 0 to 1793 dots | |
73
