[Socket]:
Select whether or not socket communication is enabled.
Default | Enable |
Options | Disable, Enable |
[Port Number]:
Set a port number used for socket communication.
Default | 8000 |
Range | 0 to 65535 |
[WEB Printer]:
Select whether or not the Web server function is enabled.
Default | Disable |
Options | Disable, Enable, Enable (External Memory) |
[SNMP]:
Select whether to enable or disable the SNMP feature.
Default | Enable |
Options | Disable, Enable |
[SNMP Trap] Group
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10]:
Select whether to enable or disable the SNMP trap.
Default | Disable |
Options | Disable, Error, Job End, Error & Job End |
When enabled, set the IP address of the terminals that monitors the SNMP trap.
When this parameter is set to other than "Disable", entry of IP address becomes enabled. When "Disable" is selected, the IP address returns to the default.
Default | 0.0.0.0 |
Range | 0.0.0.0 to 255.255.255.255 |
[Server] Group [DHCP]:
Select whether or not DHCP clients are enabled.
Default | Disable |
Options | Disable, Enable |
[DHCP Host Name]: Set a host name.
When no name is entered, the printer's MAC address is used. Use up to 32 alphanumeric characters to enter a name.
[DHCP Client ID]:
Set a DHCP Client ID.
When "HEX" is selected for the [Input Type], set the ID using up to 128 characters ranging from "0" to "F".
Enter two alphanumeric characters from "0" to "F". Entries are not
Two characters indicate one HEX character. (Example: "0"
When "ASCII" is selected for the [Input Type], set the ID using up to 64 alphanumeric characters.
[Input Type]:
Select a code used for entering a DHCP client ID.
When the code is changed, the currently set DHCP client ID is cleared.
Default | HEX |
Options | HEX, ASCII |
46
