Manuals / Toshiba / Computer Equipment / Label Maker

Toshiba B-EX operation manual WLAN Tab, Setup group, Setup item, Options or range, Default

Models: B-EX

1 95

Download 95 pages 36.08 Kb

Page 91

Manual background

WLAN Tab

Setup group	Setup item	Options or range	Default
WLAN Basic	Communication Standard	802.11b	802.11b/g
		802.11g
		802.11b/g
WLAN Detail	ESS ID	0 to 32 characters	TOSHIBATEC
	Beacon Transmitting Interval	1 to 65535 (msec)	1000
	Roaming Threshold	0 to 99	70
	Country Code	Displayed only when obtained.	Blank
802.11b	Channel	1 to 14	1
	Baud Rate	11 Mbps	11 Mbps
		5.5 Mbps
		2 Mbps
		1 Mbps
802.11g	Channel	1 to 13	1
	Baud Rate	54 Mbps	54 Mbps
		48 Mbps
		36 Mbps
		24 Mbps
		18 Mbps
		12 Mbps
		9 Mbps
		6 Mbps
		11 Mbps
		5.5 Mbps
		2 Mbps
		1 Mbps
Priority AP	Property	ANY SSID OFF	ANY SSID OFF
		ANY SSID ON / Priority AP OFF
		ANY SSID ON / Priority AP ON /
		Other AP OFF
		ANY SSID ON / Priority AP ON /
		Other AP ON
	MAC Address 1	Fixed at 12 characters	Blank
	MAC Address 2	Fixed at 12 characters	Blank
	MAC Address 3	Fixed at 12 characters	Blank
	MAC Address 4	Fixed at 12 characters	Blank
	MAC Address 5	Fixed at 12 characters	Blank
Authentication	(1) Connection Mode	Infrastructure	Infrastructure
		Adhoc
	(2) Encryption	Disable	Disable
		WEP40
		WEP104
		TKIP
		AES
	(3) Network Authentication	Open System	Open System
		Shared Key
		WPA-EAP
		WPA-PSK
		WPA2-EAP
		WPA2-PSK
	(4) EAP Method	Disable	Disable
		EAP-MD5
		EAP-TLS
		EAP-TTLS
		LEAP
		LEAP (NetworkEAP)
		PEAP
		PEAP (w/o Cert.)
		EAP-FAST

88

Image 91

Toshiba B-EX operation manual WLAN Tab, Setup group, Setup item, Options or range, Default

Contents

Second Edition January 25 B-EX Setting Tool Operation ManualB-EX Series TOSHIBA Label Printer3. START-UP Table of Contents2. INSTALLATION 1. INTRODUCTION6. APPENDIX Software License Agreement Features1. Introduction Supported PrintersNotation Outline of the FunctionsTrademark and Copyright Screens Used in This DocumentHardware Operational ConditionsDisclaimer Software Operation SystemInstallation Procedure 2. Installation6. The Start Copying Files screen appears These are changeable after installationClick Finish to complete the operation Uninstallation Printer 3. Start-upMain Screen 4. PreparationProcessing related to the memory The settings specified in the Printer Setting screen are reflectedMain view Displays the setting screen of the selected menu icon Memory Management TabFile MenusExport This menu is used to store setup information in a specified fileIt also stores the status of the current setup screen When you do not want to store security information, click No ExitEdit View Contents This menu is used to display the main screen for Help About HelpThis menu is used to display version information Printer Setting B-EX6T2-G and B-EX6T2-T are not approved at present Page Page Multi LAN Import When the export failed, the error message is displayedAn added printer is inserted under the currently selected printer DeletePage 1 bit, 2 bits The setting is saved upon changed, and reflected in the header viewStop Bit OptionsEnvironment Range Password Set a password to log in the ProductNo password is set right after the installation CancelPassword Change Progress Bar Screen Processing ScreenCompletion Screen Progress Status Cannot confirm the printer is in online mode Updating the main program Updating the system mode programTransmission and update of the main program are in progress Transmission and update of the data file are in progressPrinter List Screen 5. Functions Parameter SettingSet Parameter When this button is clicked, the following message is displayedRestore to Online The printer mode is changed from the parameter setting to onlineWhen this button is clicked, the confirmation message is displayed General Tab Default DefaultTYPE 1 Compatible with current version, TYPE 2 Special specification DefaultDefault DefaultSet an even number for the LCD contrast fine adjustment DefaultDisable, Standard, ECO, ECO with Back Feed Default RangeDefault DisableGeneral 2 Tab Default DefaultTone Adjustment Group Thermal Transfer DefaultCommand Set This setting cannot be changed SHELLSelect how to set the threshold for the reflective sensor DefaultOld Password Enter the password currently set on the printer Password Group System Mode PasswordNew Password DefaultDevice Tab Default DefaultSelect Centronics ACK /BUSY signal timing DefaultLAN Tab Disable, Enable, Enable External Memory Disable, Enable STATIC, Enable DHCP WINS Select whether or not the WINS protocol is enabledDefault DisableWLAN Tab Open System, Shared Key, WPA-EAP, WPA-PSK, WPA2-EAP, WPA2-PSK ANY SSID OFF, ANY SSID ON / Priority AP OFFAuthentication System Settings DefaultDisable Disable, EAP-MD5, EAP-TLS, EAP-TTLS, LEAP, LEAP NetworkEAP, PEAPWhen ASCII mode is used for entries, use five alphanumeric characters When the code is changed, the WEP key is clearedDefault When the WEP key size is changed, the WEP key is cleared 40 bitsWLAN 2 Tab Default Set a secret key passphrase, using up to 64 alphanumeric charactersDefault Internal Authentication Select an internal authentication methodDisable PAC File PasswordSelect whether to enable or disable the CCX options DefaultRFID Tab Default DefaultDefault DefaultSelf Diagnosis Tab MaintenanceAfter refreshing the display, ALL is selected When this button is clicked, the processing startsPrinter Reset The printer is reset A reset will be executed regardless of the printer statusClear Selected maintenance counter is cleared to zero Maintenance Counter ClearSelect the option to clear maintenance counter DefaultInitialize Memory Management Tab Default DefaultDefault The storage area size for printer commands is displayedPage Firmware Download DownloadStart Download When Yes is clicked, the existing file is replacedWhen No is clicked, the processing is canceled Delete Up to eight ROM files can be addedBASIC Download Starting block Specify the area where the program is stored DefaultThe storage area size for printer commands is displayed When checked, the starting block and the program file can be selectedStart Download Data fileCreate HTML/XML ROM \JPN\PASS folder File for Japanese language ROM List Data configuration of the created ROM file is displayedOutput File Specify a file where ROM data is saved \JPN\HTML folder File for Japanese languageTool Tab ToolCreate External Character Tab When Location = USB Memory 01 to 44, 51 to When Type = 51, Code = FFFF G51FFFF.bmp or G51FFF000.bmpDefault When Location = Onboard Flash Memory 01 to 440.5 x 0.5, 1.0 x 1.0, 2.0 x 2.0, 3.0 x 3.0, 1.0 x 2.0, 2.0 x Create Output File Specify the file where the external character is storedA Bitmap External Character Command is created with nibble data The file extension is gaiTest Print Tab Default DefaultIssue Mode Select an issue mode DefaultSlant Lines 3 dot Barcodes Slant Lines 1 dot Characters6. Appendix Error Message List Printer Setting screen When using hex. format, enter a 10-digit or 26-digitWhen using ASCII, enter a 5-digit or 13-digit specified on the Printer Setting screenGenerating a print command failed Creating an External Character command failedThe file where the image to be printed is stored cannot be printing cannot be performed, re-install theGeneral Tab Setup Items ListTransmissive Sensor with Back Feed Disable DisableDisable EnableGeneral 2 Tab Tone AdjustmentDevice Tab Setup groupSetup item DefaultLAN Tab Setup groupSetup item DefaultWLAN Tab Setup groupSetup item DefaultDisable Default KeyDisable DisableWLAN 2 Tab Setup groupSetup item DefaultRFID Tab Setup groupSetup item Default