Toshiba B-EX Product Group Printer Serial No, This setting cannot be changed SHELL, Default

[Product] Group

[Printer Serial No.]:

The serial number specific to the printer is displayed.

This setting cannot be changed.

[SHELL]:

The status of the SHELL function is displayed. This setting cannot be changed.

[Sensor] Group

[Reflective Sensor Threshold Select]:

Select how to set the threshold for the reflective sensor.

Default	Command Set
Options	Manual Set, Command Set

[Reflective Sensor Threshold]:

Set a fine adjustment value for threshold to the reflective sensor output in units of 0.1 V.

Default	1.0 V
Range	0.1 to 4.0 V

[Transmissive Sensor Threshold Select]:

Select how to set the threshold for the transmissive sensor.

Default	Command Set
Options	Manual Set, Command Set

[Transmissive Sensor Threshold]:

Set a fine adjustment value for threshold to the transmissive sensor output in units of 0.1 V.

Default	1.4 V
Range	0.1 to 4.0 V

[Ribbon Adjustment] Group [Drive Voltage (Take-up)]:

Fine adjust the ribbon take-up motor voltage (torque).

The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is displayed in the left box.

When the parameter is not retrieved, the value in the left box becomes zero (0).

Default	0
Range	-15 to +10

[Drive Voltage (Feed)]:

Fine adjust the ribbon feed motor voltage (torque).

The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is displayed in the left box.

When the parameter is not retrieved, the value in the left box becomes zero (0).

Default	0
Range	-15 to +10

[RTC] Group [Date Time]:

The current date and time programmed for the RTC module are displayed. This setting cannot be changed.

[Battery Check]:

Select whether to enable or disable the battery check function.

Default	Disable
Options	Disable, Enable

[Renewal]:

Select the timing when the date and time are updated during printing.

Default	Batch
Options	Batch, Page

41