Defining Routing Rules | Routing User Guide |
|
|
Rule Conditions
In routing rules, a condition is a comparison between a particular property of an image and a
A routing rule can contain multiple conditions. A single when statement precedes all conditions in a rule.
send("KANSASCITY") when MODALITY = "CR"
SOURCE = "WICHITA"
The parts of a condition are:
property operator value
A property is one of the known attributes of an image. Properties that can be used in a condition are listed the following section.
An operator is a code for a type of comparison. Operators are described on page 20.
A value is a text or date string supplied by the user. A value specifies what is being tested in the condition. Values are described on page 21.
Properties
The properties listed in this section can be used in routing rule conditions.
ÂProperty names are not
Frequently Used Properties
MODALITY
Abbreviation for the type of modality. Possible values are listed below. Retired values are indicated by (ret.).
AS: Angioscopy | MA: Magnetic Resonance Angiography |
AU: Audio | MG: Mammography |
BI: Biomagnetic Imaging | MR: Magnetic Resonance |
CD: Color Flow Doppler | MS: Magnetic Resonance Spectroscopy |
CF: Cinefluorography | NM: Nuclear Medicine |
CP: Colposcopy | OP: Ophthalmic Photography |
CR: Computed Radiography | OT: Other |
CS: Cystoscopy | PR: Presentation State |
CT: Computed Tomography | PT: Positron Emission Tomography (PET) |
14 | VistA Imaging V. 3.0, Patch 18 | April 2006 |
