Appendix B: Using MAG_Decompressor | Routing User Guide |
|
|
bIn the System Properties dialog, click the Advanced tab, then click Environment Variables.
cIn the System Variables list at the bottom of the dialog, locate the following variables and adjust the values if needed.
DECOMP_LOG_FSPEC: the path and file name of the decompression service log file. The administrative user must have
DECOMP_LOG_FILE_MBYTES: the maximum size permitted for the decompression service
DECOMP_WATCH_DIR: the
The format of this name must follow the usual pattern: <drive:>\<path>[\]
DECOMP_DELAY_MS: the number of milliseconds that the service will wait after detecting a compressed file before beginning the decompression process (default is 50ms).
dClick OK on the various dialogs until all dialog windows for setting up System parameters are closed. (Keep the Control Panel open; it will be needed for a later step).
4Activate the MAG_Decompressor program as follows:
a Open a command line window (click Start Run, then enter ‘cmd’).
bEnter the following command to switch to the MAG_Decompressor installation folder:
cd \Program Files\VistA\Imaging\MAG_Decompressor <Enter>
cEnter dir at the prompt and verify that the files shown below are present.
Directory of C:\Program Files\Vista\Imaging\MAG_Decompressor
05/02/2005 | 09:37a | <DIR> | . |
| |
05/02/2005 | 09:37a | <DIR> | .. | ||
04/13/2005 | 07:16a | 856,064 | awj2k.dll | ||
05/02/2005 | 08:39a | 53,248 | MAG_Decompressor.exe | ||
| 2 | File(s) | 909,312 | bytes | |
C:\ . . .> | 2 | Dir(s) | 58,401,358,848 | bytes free | |
|
|
|
|
|
80 | VistA Imaging V. 3.0, Patch 18 | April 2006 |