Telephone operation
Phone settings
From this menu you can change the following telephone settings: ringer volume, keypad tone, color themes, handset name, handset screen contrast or reset the telephone to its original settings.
Ringer volume
There are five volume levels on the handset. The same volume setting is applied to the Home, VoIP and Intercom ringers. To adjust the ringer volume:
Step 1: Press the Menu softkey from the idle screen.
Step 2: Press the 
, 
, 
and/or 
NavKeys to choose Phone Settings then press the Select softkey or center NavKey/SEL/
.
Step 3: Press the up or down NavKey 
or 
to choose Ringer Volume then press the Change softkey or center NavKey/SEL/
. The current ringer volume will be played.
Step 4: Press the up or down NavKey 
or 
to increase or decrease the volume. The volume level will be shown on the screen as you adjust it. A sample of the volume level will be played at the same time. When the ringer volume is set to zero (no highlighted volume bar is shown on the screen), no sample volume will be played.
Step 5: Press the Apply softkey or center NavKey/SEL/ 
to confirm, and the ringer volume level will display on the Phone Settings screen. If the ringer volume is set to zero, a ringer off icon 
will be displayed on the idle screen.
Step 6: Press the Back softkey at anytime to return to previous screen.
Phone Settings
Back | Select |
Phone Settings
Ringer Volume
Keypad Tone
on
Color Themes
Back Change
Ringer Volume
Back | Apply |
37 | www.vtechphones.com |
