VTech IP8300 user manual Base settings, Change system PIN, Step Press the up or down NavKey

Telephone operation

Base settings

Use this menu to change the system PIN, de-register handset and clear the voicemail waiting indication (VMWI).

Change system PIN

The system will require you to input the PIN to register or de-register a handset. The default system PIN is 0000. The PIN must be four digits. To change the PIN:

Step 1: Press the Menu softkey from the idle screen.

Step 2:	Press the , ,	and/or	NavKeys to choose Registration
	Settings then press the Select softkey or center NavKey/SEL/ .
Step 3:	Press the up or down NavKey		or	to choose Base Settings
	then press the Select softkey or center NavKey/SEL/ .
Step 4:	Press the up or down NavKey		or	to choose Change System
	PIN then press the Select softkey or center NavKey/SEL/ .

Step 5: Use the dial pad to enter the old PIN when prompted. Press the Apply softkey or center NavKey/SEL/ when you are finished.

Step 6: Use the dial pad to enter the new PIN when prompted. Press the left or right NavKey or to move the cursor to the right of the character you want to delete and press REDIAL/REMOVE to delete number if you make a mistake.

Step 7: Press the down NavKey to move to Confirm New PIN. Use the dial pad to re-enter the new PIN when prompted. Press the left or right NavKey or to move the cursor to the right of the character you want to delete and press REDIAL/REMOVE to delete number if you make a mistake.

Step 8: Press the Apply softkey to confirm the new PIN and the screen will display Accept. If the PINs entered in the two boxes are not the same, PIN does not match! will be displayed.

Registration Settings

Back Select

Base Setting

Change System PIN

De-register Handset

Clear VMWI

Back Select

Change System PIN

Enter OLD PIN

Back Apply

Change System PIN

Enter New PIN

Confirm New PIN

Back Apply

��The PIN digits you enter will appear as * in the box.

Telephone operation

www.vtechphones.com 44