Wacom DTK-2200 Removing Cintiq From The Display Stand, See using an alternate mount or stand

ContentsIndex

12

REMOVING CINTIQ FROM THE DISPLAY STAND

The Cintiq interactive pen display has been specifically designed for use when mounted on the Cintiq display stand. However, there may be times when it will be necessary to remove the pen display from the stand. For example, you may want to locate the pen display on a suitable VESA mounting arm.

See using an alternate mount or stand.

To remove Cintiq from the display stand:

•If the rotation lock screws are attached, remove them from the back of Cintiq.

•Position the pen display to landscape orientation before removing it from the display stand. The stand will not release unless Cintiq is in landscape orientation.

•Next, raise the stand incline to the highest position. See adjusting the display incline.

•Firmly grasp the pen display on both the left and right sides, and lift out of the display stand.

Important: When removing Cintiq from the display stand, always lift Cintiq in a direction parallel to the front of the stand. You may also need to slightly rotate Cintiq so the stand will release.

Note: When packing Cintiq for transport, first adjust the stand to its lowest position and place the foam packing blocks under the incline adjustment levers before removing Cintiq from the stand. The foam blocks will keep the stand from snapping shut while in its packaging. Always pack Cintiq and its stand in their original containers and protective cushions. Never pack Cintiq while it is mounted on the stand. Doing so may damage the pen display or stand during transport.

ContentsIndex

12