Wacom DTK-2200 user manual Display Stand Features

ContentsIndex

8

DISPLAY STAND FEATURES

Place the Cintiq display stand on your desktop or other stable work surface. Select a level location where the stand is stable and will not tip or fall when the pen display is mounted on it. Take some time to familiarize yourself with the display stand components.

Incline adjustment levers

When Cintiq is mounted on the stand, use these levers to adjust the display incline. See adjusting the display incline.

Bearing recess

Front feet

The front feet have rubber pads to reduce slippage on the desktop.

Warning

Rear feet

The rear feet are on rollers, allowing them to move when adjusting incline.

Do not operate the incline adjustment levers when Cintiq is not mounted on the stand, and do not lift the stand by the adjustment levers. The stand is spring-loaded and may cause injury or damage if released without the weight of Cintiq on the stand. Improper operation may lead to physical injury or damage to the stand. Be careful to avoid catching your finger in the gap of the movable portion of the stand.

Do not place on any unsteady surface or table. Do not place on slanted areas, unstable areas, or areas where vibration is present. Physical damage or personal injury may result if this product falls from an unsuitable surface.

Next: Mount the Cintiq interactive pen display on the Cintiq stand. See mounting Cintiq on the display stand.

ContentsIndex

8