Wegener Communications 6420 user manual Mpeg/Dvb

	iPump 6420 User’s Manual
Characteristic	Specification
ASI Transport Input Option
DVB-ASI Input	One input per DVB-ASI per EN50083-9 Annex B
Physical layer	270 Mbaub signaling on 75Ω coax cable
Minimum byte gap	Down to 5-byte interbyte gaps
Transport data rate	60 Mbps max.
Transport Demux	MPEG/DVB
Max Supported Rate	60 Mbps
Programs	Unlimited
Audio streams per	Unlimited
program
MPE/IP File Downloads
Types	1) By MPE/UDP/IP in satellite Transport
	2) By HTTP over Internet
Max aggregate data-rate	10 Mbps
over satellite
Audio Decoders	One live, and up to two file-based audio decoders may be
	assigned per audio output
Compressed modes, live	MPEG-1 Layers 1 and 2, MPEG-2 Layer 2
satellite audio streams
File playback	MPEG-1 Layers 1 & 2, PES or Program (recordings only)
	MPEG-2 Layer 2, PES or Program (recordings only)
	16-bit PCM wave
	MPEG-1 Layer 3 (“mp3” option, see below)
Compressed data-rates	Up to 384kbps ES rate
Input Sample rates/formats	32, 44.1 and 48 kHz only; mono or stereo
Supported
User-set output sample	32, 44.1 and 48 kHz
rates
MP3 codec	Constant bit rate only
	Max ES bit rate 256 kbps
	ID3 tags: v1 (file-end), v2 (file-start), both, or neither OK.
File insertion tools
Playlists	1) Quantity: Unlimited
	2) Length: Unlimited number of files, spec’d literally by
	name or using keyword selection from folders (see next)
	3) Execution options: (i) play once as temporary insert;
	(ii) loop N times as temporary insert; or (iii) loop
	indefinitely as permanent Port setting (“virtual
	channel”)

www.wegener.com 800070-01 Rev B Chapter 1, Page 14