Wegener Communications 6420 user manual Same as CUE Relays

				iPump 6420 User’s Manual
Connector		Type	Pin #	Signal Description
Designation
(Options shown
in red)
CUE RELAYS 1			25	Cue Relay #1-5: Common contact
(continued)			26	Cue Relay #1-6: Common contact
			27	Cue Relay #1-7: Common contact
			28	Cue Relay #1-8: Common contact
			29	Cue Relay #1-9: Common contact
			30	Cue Relay #1-10: Common contact
			31	Cue Relay #1-11: Common contact
			32	Cue Relay #1-12: Common contact
			33	Ground
			34	Cue Relay #1-13: Common contact
			35	Cue Relay #1-14: Common contact
			36	Cue Relay #1-15: Common contact
			37	Cue Relay #1-16: Common contact
CUE RELAYS 2		37-pin D male jack	(same pin	(Same as CUE RELAYS 1,
			numbering)	numbered #2-1 to 2-16)
RBDS 1		9-pin D female jack	1	DCD (internally pulled to +5V)
			2	RxD (data output)
			3	TxD (data input)
			4	DTR (not connected)
			5	GND
			6	DSR (internally pulled to +5V)
			7	RTS (not connected)
			8	CTS (internally pulled to +5V)
			9	RI (internally pulled to +5V, with weak
				current limiting)
RBDS 2		9-pin D female jack	(same pin	(Same as RBDS 1)
			numbering)
MODEM		RJ-11 phone jack		Standard analog telco phone line
AES3 AUDIO		9-pin D female jack	1	AES3 dig audio port 1 ‘+’
			2	AES3 dig audio port 2 ‘+’
			3	AES3 dig audio spare ‘+’
			4	Ground
			5	Ground
			6	AES3 dig audio port 1 ‘-’
			7	AES3 dig audio port 2 ‘-’
			8	AES3 dig audio spare ‘-’
			9	Ground
	www.wegener.com	800070-01 Rev B		Chapter 2, Page 30