Wegener Communications 6420 user manual Disable

iPump 6420 User’s Manual

Main Level	Second Level	Third Level	Fourth Level	Fifth Level
		Attenuation Level	0 - 20
		Headroom Level	0 -20
	IP Setup	LAN IP Settings	Lan Addressing Mode: <	Lan Static IP
			STATIC >	Address
				Lan Static
				Netmask
				Lan Static
			Lan Addressing Mode: < DHCP	Gateway
			>
		WAN IP Settings	Wan Addressing Mode: <	Wan Static IP
			STATIC >	Address
				Wan Static
				Netmask
				Wan Static
			Wan Addressing Mode: < DHCP	Gateway
			>
	HTTP Proxy Setup	HTTP Proxy Enable	DISABLE
		Mode:	ENABLE	HTTP PROXY IP:
				HTTP PROXY
				PORT:
	Transport In Setup	Transport In Status:<
		>
		Current Channel	Select Preset:	Permament
				Last Commanded
				Last Success
				Current
				# (Stored
				Channels)
			Symbol Format: <QPSK>
			FEC Ratio: <1/2,2/3,3/4,5/6,7/8>
			Download Frequency:
			Transport Data Rate:
			Transport Symbol Rate:
			Program Number:
			Tag Site:
			Done
		LNB Setup	LNB Type: <LOCAL
			OSC.,UNIVERSAL>
			LO type: (If Type= LOCAL
			OSC.)	CUSTOM FREQ
				STD C-BAND
				US KU-BAND
				EURO LOW KU-
				BAND
				EURO HI KU-
			LO Custom Freq: (If	BAND
			LO=CUSTOM FREQ)	<xxxxx.xx> MHZ
		LNB DC Power (If	<ON, OFF>
www.wegener.com		800070-01 Rev B	Chapter 3, Page 63