Wegener Communications 6420 user manual Syntax Integer

iPump 6420 User’s Manual

backupsoftwareVersion OBJECT-TYPE

SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only

STATUS mandatory ::= { unitGroup 3 }

--M_LOCAL_CONTROL_STATUS localControlStatus OBJECT-TYPE

SYNTAX INTEGER MAX-ACCESS read-only

STATUS mandatory

DESCRIPTION

"Local control allows the local user to change unit settings. If Local control is not enabled, certain unit settings may only be modified by the uplink controls stream (Compel)."

::= { unitGroup 5 }

--M_UNIT_LABEL

unitLabel OBJECT-TYPE

SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only

STATUS mandatory ::= { unitGroup 6 }

--M_INTERN_TEMP internTemp OBJECT-TYPE

SYNTAX INTEGER MAX-ACCESS read-only

STATUS mandatory ::= { unitGroup 8 }

--M_MODEL_NUM

modelNum OBJECT-TYPE

SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only

STATUS mandatory ::= { unitGroup 9 }

--M_USW_VERSION uswVersion OBJECT-TYPE

SYNTAX	DisplayString (SIZE (0..255))
MAX-ACCESS	read-only
STATUS	mandatory

::= { unitGroup 17 }

-- PCMI_GRP_TUNER (indexes: 0)

tunerGroup OBJECT IDENTIFIER ::= { pcmiData 2 }

--M_AGC_STATUS agcStatus OBJECT-TYPE

SYNTAX INTEGER {

good(0)

high(1)

low(2)

www.wegener.com 800070-01 Rev B Appendix 2, Page 115