Wegener Communications 6420 user manual Pkts

iPump 6420 User’s Manual

Main Level	Second Level	Third Level	Fourth Level	Fifth Level
	File Playback
	Signal Quality	Current Quality	Eb/No Estimate
			Signal Strength
		History this Setting	Loss from Fades
			Errored Seconds
		Elapsed Times	Signal First Acquired
			Signal Last Acquired
	AM/FM Tuner	AM/FM Tuner 1 - 2	Tuner 1 - 2 Mode
	Status	Status	Tuner 1 - 2 Frequency
			Tuner 1 - 2 Quality
	Network History	COMPEL Lock
		Status:
		COMPEL Reqired :
		Local control :
		Total Addressed
		PKTS :
		Total Valid PKTS :
		Last Addressed PKT:
		Last Valid PKT:
		UNIT Uptime:
	Current IP Info	Current LAN Info	LAN Current IP Address:
			LAN Current Netmask
			LAN Current Gateway:
			LAN has link?
			LAN MAC Address:
		Current WAN Info	WAN Current IP Address:
			WAN Current Netmask
			WAN Current Gateway:
			WAN has link?
			WAN MAC Address:
		Exp Relay Port 1 {	- - - - - - - 8 - - - - - - - G { 8 , 16
	EXP Relay Status	ON = #, OFF = -}	are ON }
		Exp Relay Port 2 {	1 - - - - - - - - A - - - - - - {17 , 26
		ON = #, OFF = -}	are ON}
	Unit Temperature (in C)
	Version Info	Software Version
		Backup Version
		USW Version
		CPU/BIOS Info
		Core OS Version
		Installed OS Patches
	Clear Diagnostic	Clear Signal
	Counters	Counters?

www.wegener.com 800070-01 Rev B Chapter 3, Page 65