Wegener Communications 6420 user manual Diagnostic screen, User Controls

iPump 6420 User’s Manual

Figure 3-15: Ops Logs screen, web interface

Diagnostic screen

From any of the normal web screens, if the user clicks on the WEGENER logo, in the upper left corner, while pressing CRTL, then the user is sent to the web Diagnostics screen. This is a fairly powerful diagnostic and debugging tool, and only advanced users should access this screen. No other information is supplied in this publicly-accessible Manual about this screen. If you are an advanced user, and you have questions, please contact WEGENER Customer Service for more information.

User Controls

The user controls affecting the web interface are listed. Compel is the preferred command method:

1.LAN IP settngs (IP address, netmask, and Gateway)

2.Allow or disallow local control. This affects many parameters needed to deliver the audio output payload. Set by Compel or the factory.

3.Allow or disallow HTTP (web) access. Set by Compel or the factory.

4.Content access permission on/off. If ON, then local users may modify or delete stored files.

www.wegener.com 800070-01 Rev B Chapter 3, Page 59