7.Following agitation the water will drain from the tub. No agitation occurs.
8.The washer will spin while clean water is sprayed into the basket. There are two (2) 15 second clean water sprays during the final spin.
Temperature Selector
The temperature Selector allows for four (4) different water temperature settings for the wash and rinse cycles. The water temperature can be matched to the types of fabrics and soils being washed.
Water Level Selector
The Water Selector allows for five (5) water levels to be selected depending on the size of the wash load. To change the water level after the washer has started, move the selector to the desired setting.
Dryer Controls
Fig.
*NORMAL AUTO DRY SETTING
PUSH TO START | PERM PRESS/ | 50 | TIMED DRY | ||
NORMAL |
| 40 | |||
DRYER | LESS DRY |
|
| HIGH HEAT | |
SIGNAL OFF | SIGNAL ON |
| * |
| 30 |
HIGH HEAT |
|
| |||
|
| MORE DRY |
|
| 20 |
|
|
|
|
| TOUCH UP |
|
|
|
|
| 10 |
HEAVY DUTY SOFT HEAT
LARGE CAPACITY | LESS DRY |
LOW HEAT |
|
|
MORE DRY | 20 | AIR DRY |
KNIT/DELICATE | 10 | NO HEAT |
|
DRYINGCOOLING
OFF
Cycle Control Knob
The dryer features seven (7) different drying cycles. Two of these are Timed Dry Cycles: Timed Dry and Air Dry. The other five are automatic.
Dryer Temperature Control
The Dryer Temperature Control is controlled in the timer; high, low and air.
Push To Start Button
The Push to Start button is used to start the dryer operation. It must be repressed after the dryer door has been opened during a cycle.
End Of Cycle Signal
The push to start button controls a signal to let you know when the cycle has finished. The signal can be turned on or off.
106
