Whirlpool 4322616 manual Dryer Toe Panel Access, Door Front Panel Access

Dryer Toe Panel Access

1.Remove the Transition Panel by removing the three (3) retaining screws.

2.Using a putty knife, release the two (2) retaining clips and remove the toe panel. (Fig. 5-24)

Fig. 5-24

	Blower	Heat	Gas Burner
Drive
Motor	Assembly	Element	Assembly

Fig. 5-25

Door Front Panel Access

1.Remove the transition panel and the Toe Panel.

2.Flip down the Control Panel. (Fig. 5-26)

3.Disconnect the Door Switch Wires.

4.Remove the Control Panel from the Front Panel and set it on top of the unit.

Door

Switch

Wires

Fig. 5-27

Fig. 5-26

(Fig. 5-27)

Screws

114