Chapter 20 Queuing Method
Figure 78 Advanced Application > Queuing Method
The following table describes the labels in this screen.
Table 49 Advanced Application > Queuing Method
LABEL | DESCRIPTION |
Method | Select SPQ (Strictly Priority Queuing), WFQ (Weighted Fair Queuing) or WRR |
| (Weighted Round Robin). |
| Strictly Priority services queues based on priority only. When the highest priority queue |
| empties, traffic on the next |
| Q0 the lowest. |
| Weighted Fair Queuing is used to guarantee each queue's minimum bandwidth based on |
| their bandwidth portion (weight) (the number you configure in the Weight field). Queues |
| with larger weights get more guaranteed bandwidth than queues with smaller weights. |
| Weighted Round Robin Scheduling services queues on a rotating basis based on their |
| queue weight (the number you configure in the queue Weight field). Queues with larger |
| weights get more service than queues with smaller weights. |
|
|
FE Port | This field is applicable only when you select WFQ or WRR. |
SPQ | Select a queue (Q0 to Q7) to have the Switch use Strictly Priority to service the |
Enable | subsequent queue(s) after and including the specified queue for the 10/100 Mbps |
| Ethernet ports. For example, if you select Q5, the Switch services traffic on Q5, Q6 and |
| Q7 using Strictly Priority. |
| Select None to always use WFQ or WRR for the 10/100 Mbps Ethernet ports. |
|
|
Port | This label shows the port you are configuring. |
|
|
| 167 |
|
|