Chapter 48 Interface Commands

where

 

<wt1> <wt2> ... =

Sets the interface WFQ weighting. A weight value of one to eight is given to

<wt8>

each variable from wt 1 to wt 8.

An example is shown next.

•Enable WFQ queuing on the Switch.

•Enable port 2 and ports 6 to 8 for configuration.

•Set the queue weights from Q0 to Q7.

sysname# configure sysname(config)# wfq

sysname(config)# interface port-channel 2,6-8 sysname(config-interface)# weight 8 7 6 5 4 3 2 1

48.2.11 egress set

Syntax:

egress set <port-list>

where

<port-list>

= Sets the outgoing traffic port list for a port-based VLAN.

An example is shown next.

•Enable port-based VLAN tagging on the Switch.

•Enable ports one, three, four and five for configuration.

•Set the outgoing traffic ports as the CPU (0), seven (7) and eight (8).

sysname(config)# vlan-type port-based sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# egress set 0,7,8

48.2.12 qos priority

Syntax:

qos priority <0 .. 7>

where

<0 .. 7>

= Sets the quality of service priority for a port.

An example is shown next.

• Enable ports one, three, four and five for configuration.

 

409

ES-4124 User’s Guide