ZyXEL Communications ES-4124 47.9 Enabling Port Authentication, 47.9.1 RADIUS Server Settings

Chapter 47 Configuration Mode Commands

• Enable dynamic link aggregation (LACP) on trunk 1.

sysname(config)# trunk t1 sysname(config)# trunk t1 interface 5-8 sysname(config)# trunk t1 lacp

47.9 Enabling Port Authentication

To enable a port authentication, you need to specify your RADIUS server details and select the ports which require external authentication. You can set up multiple RADIUS servers and specify how the Switch will process authentication requests.

47.9.1 RADIUS Server Settings

Use the radius-servercommand to set up your RADIUS server settings.

Syntax:

radius-server host <index> <ip>

radius-server host <index> <ip> [acct-port <socket-number>] [key --> <key-string>]

radius-server timeout <1-1000> radius-server mode <priorityround-robin>

where

radius-server host <index> = Specifies the IP address of the RADIUS server. <ip>

[acct-port<socket-number>]= Changes the UDP port of the RADIUS server from the default (1812).

[key <key-string>]	= Specifies a password (up to 32 alphanumeric
	characters) as the key to be shared between the
	RADIUS server and the Switch.

400
	ES-4124 User’s Guide