Chapter 20 Queuing Method

Table 49

Advanced Application > Queuing Method (continued)

LABEL

DESCRIPTION

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this row

 

first to set the common settings and then make adjustments on a port-by-port basis.

 

Note: Changes in this row are copied to all the ports as soon as you make

 

them.

 

 

Weight

When you select WFQ or WRR enter the queue weight here. Bandwidth is divided across

 

the different traffic queues according to their weights.

 

 

GE Port

This field is applicable only when you select WFQ or WRR.

SPQ

Select a queue (Q0 to Q7) to have the Switch use Strictly Priority to service the

Enable

subsequent queue(s) after and including the specified queue for the gigabit ports. For

 

example, if you select Q5, the Switch services traffic on Q5, Q6 and Q7 using Strictly

 

Priority.

 

Select None to always use WFQ or WRR for the gigabit ports.

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top navigation

 

panel to save your changes to the non-volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

168

 

ES-4124 User’s Guide