|
| Chapter 7 Basic Setting |
| Table 8 Basic Setting > System Info (continued) | |
| LABEL | DESCRIPTION |
| Current | This field displays this fan's current speed in Revolutions Per Minute (RPM). |
|
|
|
| MAX | This field displays this fan's maximum speed measured in Revolutions Per Minute |
|
| (RPM). |
|
|
|
| MIN | This field displays this fan's minimum speed measured in Revolutions Per Minute |
|
| (RPM). "<41" is displayed for speeds too small to measure (under 2000 RPM). |
|
|
|
| Threshold | This field displays the minimum speed at which a normal fan should work. |
|
|
|
| Status | Normal indicates that this fan is functioning above the minimum speed. Error |
|
| indicates that this fan is functioning below the minimum speed. |
|
|
|
| Voltage(V) | The power supply for each voltage has a sensor that is capable of detecting and |
|
| reporting if the voltage falls out of the tolerance range. |
|
|
|
| Current | This is the current voltage reading. |
|
|
|
| MAX | This field displays the maximum voltage measured at this point. |
|
|
|
| MIN | This field displays the minimum voltage measured at this point. |
|
|
|
| Threshold | This field displays the percentage tolerance of the voltage with which the Switch still |
|
| works. |
|
|
|
| Status | Normal indicates that the voltage is within an acceptable operating range at this |
|
| point; otherwise Error is displayed. |
|
|
|
7.3 General Setup
Use this screen to configure general settings such as the system name and time. Click Basic Setting and General Setup in the navigation panel to display the screen as shown.
Figure 26 Basic Setting > General Setup
| 77 |
|
|