Chapter 48 Interface Commands
An example is shown next.
•Enable ports 1, 3, 4 and 5 for configuration.
•Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.
sysname(config)# interface
Syntax:
where
broadcast- | = | Enables broadcast storm control limit on the Switch. |
limit |
|
|
<pkt/s> | = | Limits how many broadcast packet the interface receives per second. |
An example is shown next.
•Enable port one for configuration.
•Enable broadcast control.
•Set how many broadband packets the interface receives per second.
sysname(config)# interface
The
Syntax:
where |
|
|
pir <Kbps> | = Sets the maximum bandwidth allowed for incoming traffic. | |
cir <Kbps> | = | Sets the guaranteed bandwidth allowed for incoming traffic. |
egress <Kbps> | = | Sets the maximum bandwidth allowed for outgoing traffic |
|
| (egress) on the Switch. |
An example is shown next.
406 |
| |
| ||
|
|
|